Home » Assembly Manual » Cybertruck » 4. – 13. 3D Print the Cybertruck parts » 8. 3D Print the Exoskeleton parts: Doors

8. 3D Print the Exoskeleton parts: Doors

Print Friendly, PDF & Email

Difficulty

Moderate

Steps

9

Get entire manual as PDF

Step 1: Important information!

Important Information / Downloadable Files:

If you purchased the Cybertruck digital data from our Shop than you will be able to download from your Account:

  • All .stl files,
    (which contain the Cybertruck 3D geometry),
  • PrusaSilcer .3mf files,
    (which contain the 3D Printing orientations and printing settings),
  • and .gcode files for Prusa Mini and Prusa Mk3S+.
    (which contain the necessary information for the 3D printer to print the geometry)

Important Information / Slicer software:

Our suggestion for 3D Printing slicer software:

Alternative 3D Printing slicer:

  • Any other slicer what you like, but than you should check the basic 3D Printing parameters from our manual in this and the next chapter.

Important Information / 3D Printer:

Our suggestion for 3D Printer:

Alternative 3D Printer:

Step 2: EX_DOOR_HANDLE

Printing files:

  • 2X EX_DOOR_HANDLE_L
  • 2X EX_DOOR_HANDLE_R

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 14 min
  • Filament weight: ca. 2 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 2 piece

Step 3: EX_FRONT_DOOR_PANEL

Printing files:

  • 1X EX_FRONT_DOOR_PANEL_L
  • 1X EX_FRONT_DOOR_PANEL_R

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 6h 3 min
  • Filament weight: ca. 59 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 4: EX_SIDE_MIRROR and EX_A2_PILLAR_SUPPORT

Printing files:

  • 1X EX_SIDE_MIRROR_L
  • 1X EX_SIDE_MIRROR_R
  • 1X EX_A2_PILLAR_SUPPORT_L
  • 1X EX_A2_PILLAR_SUPPORT_R

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 55 min
  • Filament weight: ca. 8 g
  • Prusa Mini compatible: Yes
  • Quantity: 4 x 1 piece

Step 5: EX_SIDE_MIRROR_GLASS

Printing files:

  • 1X EX_SIDE_MIRROR_GLASS_L
  • 1X EX_SIDE_MIRROR_GLASS_R

Printing parameters:

  • Filament material: PLA
  • Color: Transparent
    (Alternative: White )
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 3 min
  • Filament weight: ca. 1 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 6: EX_FRONT_DOOR

Printing files:

  • 1X EX_FRONT_DOOR_L
  • 1X EX_FRONT_DOOR_R

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 6h 33 min
  • Filament weight: ca. 66 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 7: EX_REAR_DOOR_PANEL

Printing files:

  • 1X EX_REAR_DOOR_PANEL_L
  • 1X EX_REAR_DOOR_PANEL_R

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 5h 17 min
  • Filament weight: ca. 49 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 8: EX_REAR_DOOR

Printing files:

  • 1X EX_REAR_DOOR_L
  • 1X EX_REAR_DOOR_R

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 6h 48 min
  • Filament weight: ca. 68 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 9: EX_C_PILLAR_SUPPORT

Printing files:

  • 1X EX_C_PILLAR_SUPPORT_L
  • 1X EX_C_PILLAR_SUPPORT_R

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 24 min
  • Filament weight: ca. 4 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 10: EX_Panel_Holder

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 3h 0min
  • Filament weight: ca. 32 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 11: EX_Panel_Text

Printing parameters:

  • Filament material: PLA
  • Color: Black and White
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 1h 8 min
  • Filament weight: ca. 13 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Multi-Color Printing:

  • 1. Layer: 0 – 0,2mm: White  –>Filament change to Black   
  • 2. Layer: 0,2 – 0,4 mm: Black –>Filament change to White
  • 3. Layer: 0,4 – 0,6 mm: White  –>Filament change to Black   
  • Other layers: Black

Use the downloaded .3mf, or .gcode files for the proper multi color settings!

2 responses to “8. 3D Print the Exoskeleton parts: Doors”

  1. I think there is a typo in EX_Panel_Text.
    RDW should become RWD.

    Is it also possible to make the text a little wider or bolder. Not everything is equally readable with me.

Leave a Reply

0

Your Product Basket

The Cart is Empty
No Product in the Cart!
0,00 $