Home » Assembly Manual » Cybertruck » 4. – 13. 3D Print the Cybertruck parts » 5. 3D Print the Exoskeleton parts: Front

5. 3D Print the Exoskeleton parts: Front

Print Friendly, PDF & Email

Difficulty

Moderate

Steps

12

Get entire manual as PDF

Step 1: Important information!

Important Information / Downloadable Files:

If you purchased the Cybertruck digital data from our Shop than you will be able to download from your Account:

  • All .stl files,
    (which contain the Cybertruck 3D geometry),
  • PrusaSilcer .3mf files,
    (which contain the 3D Printing orientations and printing settings),
  • and .gcode files for Prusa Mini and Prusa Mk3S+.
    (which contain the necessary information for the 3D printer to print the geometry)

Important Information / Slicer software:

Our suggestion for 3D Printing slicer software:

Alternative 3D Printing slicer:

  • Any other slicer what you like, but than you should check the basic 3D Printing parameters from our manual in this and the next chapter.

Important Information / 3D Printer:

Our suggestion for 3D Printer:

Alternative 3D Printer:

Step 2: EX_FENDER_FRONT

Printing files:

  • 1X EX_FENDER_FRONT_L
  • 1X EX_FENDER_FRONT_R

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 1h 31 min
  • Filament weight: ca. 13 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 3: EX_SIDE_FENDER_L

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 3h 45 min
  • Filament weight: ca. 30 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 4: EX_SIDE_FENDER_R

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 3h 45 min
  • Filament weight: ca. 30 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 5: EX_FRONT

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 100% for RC, 15% for model
  • Brim: no
  • Printing time: ca. 4h 12 min
  • Filament weight: ca. 40 g
  • Prusa Mini compatible: Yes (diagonally)
  • Quantity: 1 piece

Why 100% infill?

If you use front LED and the infill is low, than the LED light go through on the PLA too and looks stupid!

If you don’t plan to use LED, 15% infill enough!

Step 6: EX_FRONT_LIGHT

Printing parameters:

  • Filament material: PLA
  • Color: Transparent
    (Alternative: White )
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no, but good 1st layer adhesion need!
  • Printing time: ca. 15 min
  • Filament weight: ca. 2 g
  • Prusa Mini compatible: Yes (diagonally)
  • Quantity: 1 piece

Step 7: EX_HOOD

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 100% for RC, 15% for model
  • Brim: no
  • Printing time: ca. 1h 35 min
  • Filament weight: ca. 22 g
  • Prusa Mini compatible: Yes (diagonally)
  • Quantity: 1 piece

Step 8: EX_HOOD_ARM

Printing files:

  • 2X EX_HOOD_ARM_1
  • 2X EX_HOOD_ARM_2

Printing parameters:

  • Filament material: PLA
  • Color: Silver
  • Layer height: 0,2 mm
  • Support: Everywhere
  • Infill: 100%
  • Brim: no
  • Printing time: ca. 8 min
  • Filament weight: ca. 1 g
  • Prusa Mini compatible: Yes (diagonally)
  • Quantity: 2 x 2 pieces

Step 9: EX_FRUNK

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 10h 50 min
  • Filament weight: ca. 104 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 10: EX_DASHBOARD

Printing parameters:

  • Filament material: PLA
  • Color: White
  • Layer height: 0,2 mm
  • Support: Yes (Paint on support)
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 3h 36 min
  • Filament weight: ca. 26 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 11: EX_SCREEN

Printing parameters:

  • Filament material: PLA
  • Multi-Color: Black / White
  • Layer height: 0,2 mm
  • Support: No
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 24 min
  • Filament weight: ca. 4 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Multi-Color Printing:

  • 1. Layer: 0 – 0,2mm: Black –>Filament change to White
  • 1-2. Layer: 0 – 0,4 mm: White –>Filament change to Black
  • 2 – Last layer: 0,2 – 8,0 mm: Black

Use the downloaded .3mf, or .gcode files for the proper multi color settings!

Step 12: EX_YOKE_STEERING_WHEEL

Printing parameters:

  • Filament material: PLA
  • Color: Black
  • Layer height: 0,2 mm
  • Support: Yes (Paint on support)
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 33 min
  • Filament weight: ca. 5 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Leave a Reply

0

Your Product Basket

The Cart is Empty
No Product in the Cart!
0,00 $