Step 1: Important information!
Important Information / Downloadable Files:
If you purchased the Cybertruck digital data from our Shop than you will be able to download from your Account:
- All .stl files,
(which contain the Cybertruck 3D geometry), - PrusaSilcer .3mf files,
(which contain the 3D Printing orientations and printing settings), - and .gcode files for Prusa Mini and Prusa Mk3S+.
(which contain the necessary information for the 3D printer to print the geometry)
Important Information / Slicer software:
Our suggestion for 3D Printing slicer software:
- The Freeware Prusa Slicer last stable version: https://help.prusa3d.com/downloads
Alternative 3D Printing slicer:
- Any other slicer what you like, but than you should check the basic 3D Printing parameters from our manual in this and the next chapter.
Important Information / 3D Printer:
Our suggestion for 3D Printer:
Alternative 3D Printer:
- Prusa Mini: https://www.prusa3d.com/product/original-prusa-mini-kit-2/
- Any other FDM 3D Printer, with 180×180 build plate at least
Step 2: SK_MIDDLE_MAIN
Printing parameters:
- Filament material: PLA
- Color: Any color: Black ⬢
- Layer height: 0,2 mm
- Support: no
- Infill: 15%
Brim: no- Printing time: ca. 17h 49 min
- Filament weight: ca. 202 g
- Prusa Mini compatible: Yes (Turn off the Skirt)
- Quantity: 1 piece
Brim: noThe default version is made for:
- FlySky FS-GT5 2.4G 6CH RC Transmitter + Reciever
- 2x HobbyWing QuicRun 1060 60A Brushed Electronic Speed Controller ESC
Alternative version is made for:
- INJORA T6FG Transmitter
- 2x HobbyWing QuicRun 1060 60A Brushed Electronic Speed Controller ESC
Step 3: SK_MIDDLE_COVER
Printing files:
- 1X SK_MIDDLE_COVER_AWD: Print this if you build an All Wheel Drive version
- 1X SK_MIDDLE_COVER_RWD: Print this if you build a Rear Wheel Drive version
Printing parameters:
- Filament material: PLA
- Color: Any color: Black ⬢
- Layer height: 0,2 mm
- Support: no
- Infill: 15%
- Brim: no
- Printing time: ca. 5h 32 min
- Filament weight: ca. 79 g
- Prusa Mini compatible: Yes
- Quantity: 1 piece
Step 4: SK_MIDDLE_LOCKING
Printing parameters:
- Filament material: PLA
- Black: Any color: Black ⬢
- Layer height: 0,2 mm
- Support: no
- Infill: 15%
- Brim: no
- Printing time: ca. 9 min
- Filament weight: ca. 2 g
- Prusa Mini compatible: Yes
- Quantity: 2 x 1 piece
5 responses to “12. 3D Print the Skateboard parts: Middle”
Can you share a version of Step 2 without pre-configured slots for parts? In other words, just an open box? that way I can fit alternative parts into the skateboard’s middle.
Hello,
We can do it, but none of the preconfiguration you don’t need?
No, I don’t need the pre-configured slots for battery, ESCs, receivers, switches or wiring. etc; I’m using different parts. But keep the wiring holes and screw holes to connect to front and back skateboard and for the body, please and thank you!
All right, today early evening (according Eu time) it will do and send it your email)
The email sent with the files! Sorry for the half day delay.