Home » Assembly Manual » Cybertruck » 4. – 13. 3D Print the Cybertruck parts » 11. 3D Print the Skateboard parts: Front

11. 3D Print the Skateboard parts: Front

Difficulty

Moderate

Steps

16

Get entire manual as PDF

Download

Step 1: Important information!

Important Information / Downloadable Files:

If you purchased the Cybertruck digital data from our Shop than you will be able to download from your Account:

  • All .stl files,
    (which contain the Cybertruck 3D geometry),
  • PrusaSilcer .3mf files,
    (which contain the 3D Printing orientations and printing settings),
  • and .gcode files for Prusa Mini and Prusa Mk3S+.
    (which contain the necessary information for the 3D printer to print the geometry)

Important Information / Slicer software:

Our suggestion for 3D Printing slicer software:

Alternative 3D Printing slicer:

  • Any other slicer what you like, but than you should check the basic 3D Printing parameters from our manual in this and the next chapter.

Important Information / 3D Printer:

Our suggestion for 3D Printer:

Alternative 3D Printer:

Step 2: SK_FRONT_BUMPER

Printing parameters:

  • Filament material: PLA
  • Color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 3h 50 min
  • Filament weight: ca. 39 g
  • Prusa Mini compatible: Yes (diagonally)
  • Quantity: 1 piece

Step 3: SK_FRONT_LED_HOLDER

Printing parameters:

  • Filament material: PLA
  • Color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 1h 36 min
  • Filament weight: ca. 16 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 4: SK_FRONT_GIGA_PRINT

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 14h 19 min
  • Filament weight: ca. 139 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 5: SK_FRONT_GIGA_PRINT_COVER

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 7h 27 min
  • Filament weight: ca. 67 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 6: SK_STEERING_ROD

Printing files:

  • 1X SK_STEERING_ROD_L
  • 1X SK_STEERING_ROD_R

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 27 min
  • Filament weight: ca. 4 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 7: SK_STEERING_RACK_PINION

Printing files:

  • 1X SK_STEERING_RACK
  • 1X SK_STEERING_PINION

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 1h 37 min
  • Filament weight: ca. 12 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 8: SK_FRONT_LOWER_CONTROL_ARM

Printing files:

  • 1X SK_FRONT_LOWER_CONTROL_ARM_L
  • 1X SK_FRONT_LOWER_CONTROL_ARM_R

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 1h 2 min
  • Filament weight: ca. 11 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 9: SK_FRONT_UPPER_CONTROL_ARM

Printing files:

  • 1X SK_FRONT_UPPER_CONTROL_ARM_L
  • 1X SK_FRONT_UPPER_CONTROL_ARM_R

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 58 min
  • Filament weight: ca. 10 g
  • Prusa Mini compatible: Yes (diagonally)
  • Quantity: 2 x 1 pieces

Step 10: SK_ENDSTOPPER

This file (SK_ENDSTOPPER) was printed during Skateboard Rear module. If not, print it now!

Printing parameters:

  • Filament material: FLEX-TPU
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 5 min
  • Filament weight: ca. 1 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 11: SK_BRAKE_CALIPER

This file (SK_BRAKE_CALIPER) was printed during Skateboard Rear module. If not, print it now!

Printing parameters:

  • Filament material: PLA
  • Color: Red ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 19 min
  • Filament weight: ca. 2 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 12: SK_BRAKE_DISC

These files (SK_BRAKE_DISC_L and SK_BRAKE_DISC_R) were printed during Skateboard Rear module. If not, print it now!

Printing parameters:

  • Filament material: PLA
  • Color: White ⬢
  • Layer height: 0,2 mm
  • Support: No
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 23 min
  • Filament weight: ca. 3 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 13: SK_HUB_SPACER_1_2_3

Two files (SK_HUB_SPACER_1 and SK_HUB_SPACER_2) from three were printed during Skateboard Rear module. If not, print it now!
SK_HUB_SPACER_3 has to print it now!

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: No
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 3 min
  • Filament weight: ca. 1 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 14: SK_FRONT_HUB_CARRIER

Printing files:

  • 1X SK_FRONT_HUB_CARRIER_L
  • 1X SK_FRONT_HUB_CARRIER_R

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: Yes (Paint on support)
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 4h 20 min
  • Filament weight: ca. 48 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 15: SK_WHEEL_HUB

This file was printed during Skateboard Rear module. If not, print it now!

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: No
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 1h 40 min
  • Filament weight: ca. 10 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 16: SK_SPRING_PRELOAD

This file was printed during Skateboard Rear module. If not, print it now!

In the purchased pack you will found a “SK_SPRING_PRELOAD_XXmm” where XX is from 16 mm to 36 mm.

Typical pre-load length which give enough strength and good suspension characteristic is the 30 mm, or 32 mm long part, but it is dependent from your shock absorber spring /from your Cybertruck final weight and from your taste!

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: Yes
  • Infill: 50%
  • Brim: no
  • Printing time: ca. 1h 49 min
  • Filament weight: ca. 15 g
  • Prusa Mini compatible: Yes
  • Quantity: 4 x 1 piece

Leave a Reply

0

Your Product Basket

The Cart is Empty
No Product in the Cart!
0,00 $
View Cart View Checkout