Home » Assembly Manual » Cybertruck » 4. – 13. 3D Print the Cybertruck parts » 10. 3D Print the Skateboard parts: Rear

10. 3D Print the Skateboard parts: Rear

Difficulty

Moderate

Steps

15

Get entire manual as PDF

Download

Step 1: Important information!

Important Information / Downloadable Files:

If you purchased the Cybertruck digital data from our Shop than you will be able to download from your Account:

  • All .stl files,
    (which contain the Cybertruck 3D geometry),
  • PrusaSilcer .3mf files,
    (which contain the 3D Printing orientations and printing settings),
  • and .gcode files for Prusa Mini and Prusa Mk3S+.
    (which contain the necessary information for the 3D printer to print the geometry)

Important Information / Slicer software:

Our suggestion for 3D Printing slicer software:

Alternative 3D Printing slicer:

  • Any other slicer what you like, but than you should check the basic 3D Printing parameters from our manual in this and the next chapter.

Important Information / 3D Printer:

Our suggestion for 3D Printer:

Alternative 3D Printer:

Step 2: SK_REAR_BUMPER

Printing file:

  • 1X SK_REAR_BUMPER_5mm_3mm
    Default: Made for 5 mm White LED and 3 mm Red LED

Alternative file:

  • 1X SK_REAR_BUMPER_5mm_5mm
    Alternative: Made for 5 mm White LED and 5 mm Red LED

Printing parameters:

  • Filament material: PLA
  • Color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 7h 18 min
  • Filament weight: ca. 72 g
  • Prusa Mini compatible: Yes (diagonally)
  • Quantity: 1 piece

Step 3: SK_REAR_POSITION _LIGHT

Printing parameters:

  • Filament material: PLA
  • Color: Red ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 11 min
  • Filament weight: ca. 2 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Printing file:

  • 1X SK_REAR_POSITION_LIGHT_2_L
  • 1X SK_REAR_POSITION_LIGHT_2_R

Step 4: SK_LICENSE_PLATE

Printing parameters:

  • Filament material: PLA
  • Color: Black ⬢ / White ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 14 min
  • Filament weight: ca. 3 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Multi-Color Printing:

  • 0 – 4,2 mm: Black ⬢  –>Filament change to White ⬢
  • 4,2 mm – 4,6 mm: White ⬢

Step 5: SK_REAR_GIGA_PRINT

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 14h 57 min
  • Filament weight: ca. 148 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 6: SK_REAR_GIGA_PRINT_COVER

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 7h 0 min
  • Filament weight: ca. 64 g
  • Prusa Mini compatible: Yes
  • Quantity: 1 piece

Step 7: SK_REAR_LOWER_CONTROL_ARM

Printing files:

  • 1X SK_REAR_LOWER_CONTROL_ARM_L
  • 1X SK_REAR_LOWER_CONTROL_ARM_R

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 1h 11 min
  • Filament weight: ca. 13 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 8: SK_REAR_UPPER_CONTROL_ARM

Printing files:

  • 1X SK_REAR_UPPER_CONTROL_ARM_L
  • 1X SK_REAR_UPPER_CONTROL_ARM_R

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 1h 16 min
  • Filament weight: ca. 13 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 9: SK_ENDSTOPPER

This file is used on Skateboard Front module too. Print all necessary files together!

Printing files:

  • 2X SK_ENDSTOPPER: for Cybertruck Skateboard Rear
  • 2X SK_ENDSTOPPER: for Cybertruck Skateboard Front

Printing parameters:

  • Filament material: FLEX-TPU
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 5 min
  • Filament weight: ca. 1 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 10: SK_BRAKE_CALIPER

This file is used on Skateboard Front module too. Print all necessary files together!

Printing files:

  • 2X SK_BRAKE_CALIPER: for Cybertruck Skateboard Rear
  • 2X SK_BRAKE_CALIPER: for Cybertruck Skateboard Front

Printing parameters:

  • Filament material: PLA
  • Color: Red ⬢
  • Layer height: 0,2 mm
  • Support: no
  • Infill: 15%
  • Brim: no
  • Printing time: ca.19 min
  • Filament weight: ca. 2 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 11: SK_BRAKE_DISC

This files are used on Skateboard Front module too. Print all necessary files together!

Printing files:

Rear module:

  • 1X SK_BRAKE_DISC_L: for Cybertruck Skateboard Rear
  • 1X SK_BRAKE_DISC_R: for Cybertruck Skateboard Rear

Front module:

  • 1X SK_BRAKE_DISC_L: for Cybertruck Skateboard Front
  • 1X SK_BRAKE_DISC_R: for Cybertruck Skateboard Front

Printing parameters:

  • Filament material: PLA
  • Color: White ⬢
  • Layer height: 0,2 mm
  • Support: No
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 23 min
  • Filament weight: ca. 3 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 12: SK_HUB_SPACER_1_2

This files are used on Skateboard Front module too. Print all necessary files together!

Printing files:

Rear module:

  • 2X SK_HUB_SPACER_1: for Cybertruck Skateboard Rear
  • 2X SK_HUB_SPACER_2: for Cybertruck Skateboard Rear

Front module:

  • 2X SK_HUB_SPACER_1: for Cybertruck Skateboard Front
  • 2X SK_HUB_SPACER_2: for Cybertruck Skateboard Front

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: No
  • Infill: 15%
  • Brim: no
  • Printing time: ca. 10 min
  • Filament weight: ca. 2 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 2 piece

Step 13: SK_REAR_HUB_CARRIER

Printing files:

  • 1X SK_REAR_HUB_CARRIER_L
  • 1X SK_REAR_HUB_CARRIER_R

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: Yes (Paint on support)
  • Infill: 50%
  • Brim: no
  • Printing time: ca. 3h 38 min
  • Filament weight: ca. 30 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 14: SK_WHEEL_HUB

This file is used on Skateboard Front module too. Print all necessary files together!

Printing files:

  • 2X SK_WHEEL_HUB: for Cybertruck Skateboard Rear
  • 2X SK_WHEEL_HUB: for Cybertruck Skateboard Front

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: No
  • Infill: 90%
  • Brim: no
  • Printing time: ca. 1h 40 min
  • Filament weight: ca. 10 g
  • Prusa Mini compatible: Yes
  • Quantity: 2 x 1 piece

Step 15: SK_SPRING_PRELOAD

In the purchased pack you will found a “SK_SPRING_PRELOAD_XXmm” where XX is from 16 mm to 36 mm.

Typical pre-load length which give enough strength and good suspension characteristic is the 30 mm, or 32 mm long part, but it is dependent from your shock absorber spring /from your Cybertruck final weight and from your taste!

Printing parameters:

  • Filament material: PLA
  • Color: Any color: Black ⬢
  • Layer height: 0,2 mm
  • Support: Yes
  • Infill: 50%
  • Brim: no
  • Printing time: ca. 1h 49 min
  • Filament weight: ca. 15 g
  • Prusa Mini compatible: Yes
  • Quantity: 4 x 1 piece

Leave a Reply

0

Your Product Basket

The Cart is Empty
No Product in the Cart!
0,00 $
View Cart View Checkout